Amel Super Maramu 2000

Onan MDKAL Exhaust Elbow Replacement Part 2: Exhaust Mixing Elbow removal

Removing the 2 bolt that hold the Exhaust temperature sensor

Without the sensor

Removing the 2 clamps on the Exhaust

Surprisingly the exhaust hose went out easily

Then removed the water hose and put the extra in a small cup

Using 6 mm Allen key I removed the bolt, was also surprisingly easy

All 4 bolt loosen

With the 4 bold remove the exhaust holds in place

Lots of carbon built up, but not too bad

Go to: Part 3
Inspecting old Exhaust Mixing Elbow